The VOID vacuum blender.
Or add a vacuum lid to the blender you own.
A Utah company, founded in 2020.
Every blender whips air into your food. That's where the foam, the browning and the layer of water at the bottom of the glass come from. VOID blends without it. Get the complete blender, or add vacuum blending to the Blendtec or older Vitamix you already own.
30-day U.S. returns3-year warranty on every lidFits Blendtec jars and classic Vitamix bases
Four steps
Load the jar.
Greens and leaves on the bottom, frozen fruit and ice on top.
Put the lid on, pick a preset, press Go.
Wet the gasket first and the lid lifts off more easily afterward.
Turn the lid off, then blend.
The vacuum holds on its own while the blades do the work.
Pull the red tab and pour.
Venting breaks the seal. Until then the lid stays locked shut.
Three things change in the glass.
Less foam
Foam is whipped-in air. Take the air away and there's nothing to whip. You pour a full glass instead of half a glass and a head of bubbles. Whey protein, which foams worse than any fruit, pours like milk.
The color holds
Browning needs oxygen. With most of it gone from the jar, browning slows down a lot. In the test below, the glass blended with air is the one fading.
It holds together
A lot of separation starts with air. Bubbles rise and drag the pulp up with them, which is how a smoothie ends up with foam on top and water at the bottom. Blend without the air and there's much less to rise. In the test below, the VOID glass is still one drink at the twenty-minute mark.
The twenty-minute test
Same ingredients. Vacuum on vs. vacuum off.
We put the same ingredients into two VOID blenders and ran one with the vacuum on and the other with it off. These photos were taken 20 minutes after pouring.
Already have a blender you love?
Find the VOID lid or kit that fits it. Pick what you own and we'll tell you which one to order. Sometimes we ask one more question first.
Pick one of the options above and the answer appears here.
The lid fits your Blendtec.
It goes straight onto a jar you already have, so there's nothing else to buy.
WildSide+, WildSide and Fourside jars all work, and so does the Professional 800 with its sound enclosure in place. If you'd rather have the whole blender, the Complete System is a vacuum blender with its own base and jar.
See the VOID lid, $199.00The lid won't fit those jars, but the Complete System will.
The lid seals against Blendtec and VOID jars, so it doesn't fit a Ninja or a KitchenAid. The Complete System comes with its own motor base and jar, so it works on your counter without using your blender at all.
See the Complete System, $399.00Send us a photo and we'll check.
Email us a picture of your blender and we'll tell you whether the lid fits it before you order anything.
If you'd rather not wait, the Complete System comes with its own base and jar and works in any kitchen.
See the Complete System, $399.00Email us a photoThe Retrofit Kit fits your base.
It comes with a VOID jar that fits the base you already own.
That covers the 5000, Super 5000, 5200, 5300, 6300, 6500, 7500, 780, Pro 300, Pro 750, CIA, TurboBlend, and the Explorian E310, E320 and E520. Some bases need a small trim to the VOID adapter gasket before it seals. Trimming it doesn't affect your VOID warranty, and if it still doesn't fit after that, the return is free on U.S. orders. If you'd rather have the whole blender, the Complete System is a vacuum blender with its own base and jar.
See the Retrofit Kit for classic Vitamix bases, $299.00Those bases need the Complete System.
A smooth top with no rubber pad is a Self-Detect base, and the Retrofit Kit doesn't fit it. The Complete System comes with its own motor base and jar, so you can run it without touching your Vitamix.
This covers the Ascent A2300, A2500, A3300 and A3500, and the Venturist.
See the Complete System, $399.00Ask us to check firstSend us a photo of the base and we'll tell you.
Email us a picture looking down at the top of the base, where the jar sits. We'll tell you which one you need before you order anything.
A grooved black rubber pad takes the Retrofit Kit. A smooth top with no pad, which is the Ascent or the Venturist, takes the Complete System.
Email us a photoWe don't ship outside the United States from this site.
The lid and the Retrofit Kit fit the same blenders wherever you are, and the lid charges from any USB port, so voltage isn't the issue. Delivery is. Email us your country and your blender and we'll tell you the current options.
Orders shipped outside the United States can't be returned, though the warranty still applies and we'll repair it.
Ordering from outside the USBuy from LUBA, our European distributor.
LUBA GmbH in Germany sells the lid and a compatible jar under the Madalga name, on their own delivery and returns terms, and ships across Europe.
The lid is the same one we make here and the fit is the same: Blendtec jars take the lid on its own, classic Vitamix bases take the VM2 jar. LUBA doesn't list the Complete System.
How to order in EuropeThere's a version for every kitchen.
Choose what you have above. If your machine isn't on the list, the Complete System comes with its own base and jar and works on any counter.
Read the full setup guideOn U.S. orders, if it doesn't fit your machine, the return is free.
Three ways to buy
The vacuum lid is the same in every box. What changes is whether you also need a jar, or the whole blender.
Start with the complete setup
VOID Complete System
$399
- For
- Any kitchen. Nothing to match, because the blender comes with it.
- Base
- Included, 120 volt US plug
- Jar
- Included, 1.8 liter Tritan
- Vacuum lid
- Included
- Setup
- Charge the lid. No fitting.
- Warranty
- 3 years lid, 5 years base, 1 year jar
Upgrade your compatible Blendtec
VOID Lid for Blendtec jars
$199
- For
- Blendtec WildSide+, WildSide and Fourside jars, and the Professional 800. Not Vitamix or Ninja jars.
- Base
- Yours
- Jar
- Yours
- Vacuum lid
- Included
- Setup
- Charge the lid. It fits the jar you have.
- Warranty
- 3 years on the lid
Keep your classic Vitamix base
VOID Retrofit Kit for classic Vitamix bases
$299
- For
- Classic Vitamix bases with a grooved rubber pad. Not the Ascent or Venturist.
- Base
- Yours
- Jar
- Included, 1.8 liter Tritan, fits your base
- Vacuum lid
- Included
- Setup
- Charge the lid. Some bases need a small trim to the VOID adapter gasket.
- Warranty
- 3 years lid, 1 year jar
Thirty days from purchase to return or exchange on U.S. orders. If it doesn't fit your blender, that return is free.
Who makes it
Blenders run in the family
Conner Dickson's grandfather founded Blendtec, so Conner grew up around jars, blades, and motors. When the family saw what vacuum blending could do, he designed the VOID lid himself, down to the circuit board. He runs VOID with his wife, Autumn.
Common questions
How does it charge?
Every lid ships with a magnetic wireless charger, a magnetic USB-A cable that plugs into a port rated 750mA or higher, and a USB-A to USB-C adapter. A charge lasts most users at least a month of daily use. The battery is rated for thousands of charges. If it fails inside the three-year warranty, it's handled as a warranty repair on the terms set out on our warranty page.
What if it doesn't fit my blender?
Use the finder above and pick the blender you own. If it points you at the Complete System, that's because the Complete System brings its own base and jar, so it works whatever is on your counter. If you order and it doesn't fit your machine, the return is free on U.S. orders.
How do I clean it, and how do I look after it?
Neither the lid nor a VOID jar goes in the dishwasher. Rinse the lid under running water with a little dish soap, but do not submerge it, and keep the wireless charger away from water. Take the gasket off to clean underneath it.
Do not refrigerate or freeze the lid, and do not pour boiling water into it.
What's the warranty, and what if I want to send it back?
Three years on vacuum lids, five years on blender bases, one year on jars. The warranty page sets out what a repair costs and when. Separately, you have thirty days from purchase to return or exchange it on U.S. orders. On a change of mind return you cover the return shipping, and it needs to be sent back within 7 business days or a 10% fee applies. If you're returning it because it doesn't fit your blender, that return is free. We can't accept returns on orders shipped outside the United States, though the warranty still applies to those orders.